產品名稱:日本圖技GRAPHTEC記錄儀GL7000
產品型號:
更新時間:2025-06-08
產品簡介:
日本圖技GRAPHTEC記錄儀GL7000 中國電子行業儀器優質供應商——堅融實業JETYOO INDUSTRIAL & 堅友(上海)測量儀器JETYOO INSTRUMENTS,專業為中國區用戶提供儀器設備、技術培訓與售后維修服務
中國電子行業儀器優質供應商——堅融實業JETYOO INDUSTRIAL & 堅友(上海)測量儀器JETYOO INSTRUMENTS,專業為中國區用戶提供儀器設備、技術培訓與售后維修服務,Support、銷售Sale、服務Service,3S公司,為上海華東地區一家以技術為導向的儀器綜合服務商,是您值得信賴的電子行業儀器專家。
日本圖技GRAPHTEC記錄儀GL7000序:近年來,對于電氣產品與工業產品,提高其可靠性已成為重要的開發要素。諸如跌落試驗 振動試驗撞擊試驗環境試驗等,各類*的試驗應運而生。 
尤其是可動部與驅動部耐久試驗等,需反復進行數萬次試驗與數千小時的耐久試驗。在此背景下,測量機器需具備可進行高速取樣與長時間數據收錄性能、可對各類現象(電壓/溫度/高電壓)實現同時測定。 
此外,用多種產品進行長時間及耐久試驗時,需增加試驗裝置數量,為收錄其試驗數據,需配備各類小型、合理的測量儀。 
日本圖技GRAPHTEC記錄儀GL7000電壓溫度濕度數據記錄儀 
新一代數據采集裝備
該裝備可按需測量需要的信號,并通過添加不同的放大器模塊來擴大應用范圍。
該裝置可附加帶觸控面板的顯示模塊,作為獨立裝置使用或嵌入系統內使用。
 
1.適用于多種測量的擴展式放達器模塊
支持多種測量的放大器模塊
該放大器模塊支持不同的測量應用,通過添加不同類型的模塊,還可以進行混合測量。
即使在放大器模塊增加的情況下,也可保持采樣速度
即使增加模塊數量,電壓*與電壓/溫度放大器可在不影響采樣速度的情況下,保持高速多通道測量。
放大器zui多可附加10個模塊
可附加多達10個放大器模塊,進行多通道測量,一臺GL7000的通道上限為112.
 
2.配觸控面板的高清顯示模塊,可實現獨立操作或系統嵌入式操作
 
可實現獨立式配置或系統嵌入式配置的拆卸式顯示模塊
在不適用PC的情況下,通過附加的顯示模塊即可完成測量設置與信號測量。顯示模塊可安裝在不同的位置,使用一條LAM線纜*與主機連接,進行遠程操作;該模塊還可嵌入系統內部。即使在連接顯示模塊的情況下,主機依然可由PC操作。
高清顯示與觸控面板提高使用的便捷性
觸控面板使條件設置更直觀,還可使用類似GL系列的游標鍵進行操作。
5.7英寸高清易讀的大屏LCD顯示屏
使用清晰的5.7英寸彩色寬屏TFT-LCD顯示屏(VGA:640*480點陣)。無論是潑形模式還是數字模式,均可輕松讀取數據,檢查測量參數設置。
 
3.技術參數
Voltage/Temperature Module Specifications
Model number  | GL7-M  | ||||
Number of input channels  | 10 channels  | ||||
Input method  | All channels isolated balanced input, Scans channels for sampling, Screw terminal (M3 screw)  | ||||
Sampling speed  | 100 Samples/s at 1-10ch to 1 Sample/h (10 ms with 1-10ch to 1 hr. interval)  | ||||
Measurement range  | Voltage  | 20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50 V, and 1-5 V/F.S.  | |||
Temperature  | Thermocouple: K, J, E, T, R, S, B, N, and W (WRe5-26),   | ||||
Humidity *1  | 0 to 100 % (using scaling function in 5V range, humidity sensor B-530)  | ||||
Measurement accuracy*2  | Voltage  | ± 0.1 % of F.S.  | |||
Temperature  | Thermocouple  | Measurement range  | Measurement accuracy  | ||
R/S  | 0 °C ≤ TS ≤ 100 °C  | ± 5.2 °C  | |||
100 °C < TS ≤ 300 °C  | ± 3.0 °C  | ||||
R: 300 °C < TS ≤ 1600 °C  | ± (0.05 % of reading + 2.0 °C)  | ||||
S: 300 °C < TS ≤ 1760 °C  | ± (0.05 % of reading + 2.0 °C)  | ||||
B  | 400 °C ≤ TS ≤ 600 °C  | ± 3.5 °C  | |||
600 °C < TS ≤ 1820 °C  | ± (0.05 % of reading + 2.0 °C)  | ||||
K  | -200 °C ≤ TS ≤ -100 °C  | ± (0.05 % of reading + 2.0 °C)  | |||
-100 °C < TS ≤ 1370 °C  | ± (0.05 % of reading + 1.0 °C)  | ||||
E  | -200 °C ≤ TS ≤ -100 °C  | ± (0.05 % of reading + 2.0 °C)  | |||
-100 °C < TS ≤ 800 °C  | ± (0.05 % of reading + 1.0 °C)  | ||||
T  | -200 °C ≤ TS ≤ -100 °C  | ± (0.1 % of reading + 1.5 °C)  | |||
-100 °C < TS ≤ 400 °C  | ± (0.1 % of reading + 0.5 °C)  | ||||
J  | -200 °C ≤ TS ≤ -100 °C  | ± 2.7 °C  | |||
-100 °C < TS ≤ 100 °C  | ± 1.7 °C  | ||||
100 °C < TS ≤ 1100 °C  | ± (0.05 % of reading + 1.0 °C)  | ||||
N  | 0 °C ≤ TS ≤ 1300 °C  | ± (0.1 % of reading + 1.0 °C)  | |||
W  | 0 °C ≤ TS ≤ 2000 °C  | ± (0.1 % of reading + 1.5 °C)  | |||
Reference Junction Compensation (R.J.C.) accuracy: ± 0.5 °C *3  | |||||
RTD  | Measurement range  | Driving current  | Accuracy  | ||
Pt100  | -200 °C to 850 °C (FS = 1050 °C)  | 1 mA  | ± 1.0 °C  | ||
JPt100  | -200 °C to 500 °C (FS = 700 °C)  | 1 mA  | ± 0.8 °C  | ||
Pt1000  | -200 °C to 500 °C (FS = 700 °C)  | 0.2 mA  | ± 0.8 °C  | ||
R.J. Compensation  | Selecting of the internal or external  | ||||
A/D Converter  | Sigma-Delta type, 16 bits (effective resolution: 1/40000 of measuring full range)  | ||||
Stability with temperature  | Gain  | 0.01 % of F.S./°C  | |||
Zero *4  | 0.02 % of F.S./°C  | ||||
Input impedance  | 1 MΩ ± 5 %  | ||||
Maximum input voltage  | Between (+) / (-) terminal  | 60 V p-p  | |||
Between channels  | 60 V p-p  | ||||
Between channel / GND  | 60 V p-p  | ||||
Maximum voltage  | Between channels  | 350 V p-p (1 minute)  | |||
Between channel / GND  | 350 V p-p (1 minute)  | ||||
Isolation  | Between input / GND  | Min. 50 MΩ (at 500 V DC)  | |||
Common-mode rejection ratio  | Min. 90 dB (50/60 Hz, Signal source impedance: Max. 300 Ω)  | ||||
Filter  | Off, 2, 5, 10, 20, 40 (Moving average in selected number. When the sample is longer than 5 seconds, the data sampled in the sub-sample (5 seconds) will be used for creating the average value. )  | ||||
5V output  | Driving the humidity sensor B-530, 1 channel  | ||||
External dimensions (W×D×H)  | 49 x 136 x 160 mm (Excluding projection)  | ||||
Weight  | Approx. 770 g  | ||||
Voltage module specifications
Voltage module specifications  | Voltage  | High Speed Voltage  | |
Model number  | GL7-V  | GL7-HSV  | |
Number of input channels  | 10 channels  | 4 channels  | |
Input method  | All channels isolated unbalanced input, Simultaneous sampling, Screw terminal  | All channels isolated unbalanced input, Simultaneous sampling, BNC connector  | |
Sampling speed (interval)  | 1 k Samples/s to 1 Sample/h (1ms to 1h)  | 1 M Samples/s to 1 Sample/h (1μs to 1h)  | |
Measurement range  | 100, 200, 500 mV,1, 2, 5, 10, 20, 50, 100 V, and 1-5 V/F.S.  | ||
Measurement accuracy*5  | ± 0.25 % of F.S.  | ||
A/D Converter  | Successive Approximation type, 16 bits (effective resolution: 1/40000 of measuring full range)  | ||
Stability with temperature  | Gain  | 0.01 % of F.S./°C  | |
Zero  | 0.02 % of F.S./°C  | ||
Input impedance  | 1 MΩ ± 5 %  | ||
Maximum input voltage  | Between (+) / (-) terminal  | 100mV to 1V range: 60 V p-p, 2V to 100V range: 100 V p-p  | |
Between channels  | 60 V p-p  | ||
Between channel / GND  | 60 V p-p  | ||
Maximum voltage  | Between channels  | 1000 V p-p (1 minute)  | |
Between channel / GND  | 1000 V p-p (1 minute)  | ||
Isolation  | Between input / GND  | Min. 50 MΩ (at 500 V DC)  | |
Common-mode rejection ratio  | Min. 90 dB (50/60 Hz, Signal source impedance: Max. 300 Ω)  | ||
Frequency response  | DC to 1 k Hz (at +1/-3 dB)  | DC to 2 k Hz (at +1/-3 dB)  | |
Filter (Low pass)  | Off, Line(1.5Hz), 5, 50, 500 Hz (-3dB, 6dB/oct)  | Off, Line(1.5Hz), 5, 50, 500, 5k, 50k Hz (at -3dB, 6dB/oct)  | |
External dimensions (W×D×H)  | 49 x 136 x 160 mm (Excluding projection)  | ||
Weight  | Approx. 840 g  | Approx. 740 g  | |
Logic/Pulse Module Specifications
Model number  | GL7-L/P  | |
Number of input channels  | 16 channels  | |
Input method  | All channels common ground, simultaneous sampling, Circular connector (4ch/connector)  | |
Sampling speed  | Logic mode  | Up to 1 M Samples/s (1μs interval)  | 
Pulse mode  | Up to 10 k Samples/s (100μs interval)  | |
Measurement mode  | Selecting of the Logic input mode or Pulse input mode *6  | |
Mode  | Pulse  | Rotation count (RPM), Accumulating count, Instant count  | 
Rotation count (RPM)  | Function  | Counting the number of pulses per sampling interval and then it is converted to RPM  | 
Range  | 50, 500, 5000, 50 k, 500 k, 5 M, 50 M, 500 M rpm/F.S.  | |
Accumulating count  | Function  | Accumulating the number of pulses from the start of measurement  | 
Range  | 50, 500, 5 k, 50 k, 500 k, 5 M, 50 M, 500 M counts/F.S.  | |
Instant count  | Function  | Counting the number of pulses per sampling interval (count is reset at each sampling)  | 
Range  | 50, 500, 5 k, 50 k, 500 k, 5 M, 50 M, 500 M counts/F.S.  | |
Max. input frequency  | 1 M Hz  | |
Max. number of count  | 15 M counts (24 bits counter is used)  | |
Input signal  | Voltage range  | 0 to +24 V (common ground)  | 
Signal type  | Contact (Relay), Open collector, Voltage  | |
Threshold  | Approx. 2.5 V  | |
Hysteresis  | Approx. 0.5 V (2.5 V to 3 V)  | |
Filter  | Off or On (-3 dB at 50 Hz)  | |
External dimensions (W×D×H)  | 49 x 136 x 160 mm (Excluding projection)  | |
Weight  | Approx. 700 g  | |